Module:Convert/text: Difference between revisions

From Chalo Chatu, Zambia online encyclopedia

Module:Convert/text (view source)

Revision as of 13:12, 22 September 2019

832 bytes removed ,  22 September 2019
m
1 revision imported
(Created page with "-- Text used by Module:Convert for enwiki. -- This is a separate module to simplify translation for use on another wiki. -- See en:Template:Convert/Transwiki guide if cop...")
 
m (1 revision imported)
 
(One intermediate revision by the same user not shown)
Line 19: Line 19:
['c'] = { exponent = -2, name = 'centi',                  },
['c'] = { exponent = -2, name = 'centi',                  },
['m'] = { exponent = -3, name = 'milli',                  },
['m'] = { exponent = -3, name = 'milli',                  },
['μ'] = { exponent = -6, name = 'micro', prefix = 'µ'    },  -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['μ'] = { exponent = -6, name = 'micro',                 },  -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['µ'] = { exponent = -6, name = 'micro',                 },  -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['µ'] = { exponent = -6, name = 'micro', prefix = 'μ'    },  -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['u'] = { exponent = -6, name = 'micro', prefix = 'µ'    },  -- not an SI prefix, but allow for people typing this
['u'] = { exponent = -6, name = 'micro', prefix = 'μ'    },  -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = 'nano' ,                  },
['n'] = { exponent = -9, name = 'nano' ,                  },
['p'] = { exponent =-12, name = 'pico' ,                  },
['p'] = { exponent =-12, name = 'pico' ,                  },
Line 49: Line 49:
}
}


-- One of the following categories is included in the text of each message.
-- Using the same category for each is simplest.
local all_categories = {
local all_categories = {
unit = "[[Category:Convert errors]]",
unit = "[[Category:Convert errors]]",
option = "[[Category:Convert errors]]",
option = "[[Category:Convert errors]]",
warning = '[[Category:Convert invalid options]]',
tracking = '[[Category:Convert tracking]]',
}
}


Line 65: Line 65:
-- Message format string: $1=title, $2=text, $3=category, $4=anchor.
-- Message format string: $1=title, $2=text, $3=category, $4=anchor.
-- Each displayed message starts with "Convert:" so can easily locate by searching article.
-- Each displayed message starts with "Convert:" so can easily locate by searching article.
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3',
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3<span class="error"></span>',
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3',
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3<span class="error"></span>',
cvt_format_preview = '<strong class="error">Error in convert: $1 [[Help:Convert messages#$4|(help)]]</strong>$3',
cvt_format_preview = '<strong class="error">Error in convert: $1 [[Help:Convert messages#$4|(help)]]</strong>$3',
-- Each of following messages is a table:
-- Each of following messages is a table:
Line 82: Line 82:
cvt_no_num        = { 'Needs the number to be converted'          , 'needs a number'      , 'option',  'needs_number'        },
cvt_no_num        = { 'Needs the number to be converted'          , 'needs a number'      , 'option',  'needs_number'        },
cvt_no_num2        = { 'Needs another number for a range'          , 'needs another number', 'option',  'needs_another_number' },
cvt_no_num2        = { 'Needs another number for a range'          , 'needs another number', 'option',  'needs_another_number' },
cvt_bad_frac      = { 'frac "$1" must be an integer above 1'       , 'invalid fraction'    , 'option',  'invalid_fraction'    },
cvt_bad_frac      = { '"$1" needs an integer above 1'             , 'invalid fraction'    , 'option',  'invalid_fraction'    },
cvt_bad_prec      = { 'Precision "$1" must be an integer'          , 'invalid precision'  , 'option',  'invalid_precision'    },
cvt_bad_prec      = { 'Precision "$1" must be an integer'          , 'invalid precision'  , 'option',  'invalid_precision'    },
cvt_bad_sigfig    = { 'sigfig "$1" must be a positive integer'     , 'invalid sigfig'      , 'option',  'invalid_sigfig'      },
cvt_bad_sigfig    = { '"$1" needs a positive integer'             , 'invalid sigfig'      , 'option',  'invalid_sigfig'      },
cvt_empty_option  = { 'Ignored empty option "$1"'                  , 'empty option'        , 'option',  'empty_option'        },
cvt_empty_option  = { 'Ignored empty option "$1"'                  , 'empty option'        , 'option',  'empty_option'        },
cvt_deprecated    = { 'Option "$1" is deprecated'                  , '*'                  , 'option',  'deprecated_option', format = 'cvt_format2' },
cvt_deprecated    = { 'Option "$1" is deprecated'                  , '*'                  , 'option',  'deprecated_option', format = 'cvt_format2', nowarn = true },
cvt_no_spell      = { 'Spelling is not available'                  , 'bug, ask for help'  , 'option',  'ask_for_help'        },
cvt_no_spell      = { 'Spelling is not available'                  , 'bug, ask for help'  , 'option',  'ask_for_help'        },
cvt_unknown_option = { 'Ignored invalid option "$1"'                , 'invalid option'      , 'option',  'invalid_option'      },
cvt_unknown_option = { 'Ignored invalid option "$1"'                , 'invalid option'      , 'option',  'invalid_option'      },
Line 142: Line 142:
["by(x)"]  = { input = " by ", output = " ×&nbsp;", out_range_x = true },
["by(x)"]  = { input = " by ", output = " ×&nbsp;", out_range_x = true },
["x"]      = { off = " by ", on = " ×&nbsp;", abbr_range_x = true },
["x"]      = { off = " by ", on = " ×&nbsp;", abbr_range_x = true },
["X"]      = { off = " by ", on = " ×&nbsp;" },  -- TEMPORARY and undocumented option for experiments to compare with new abbr_range_x
["xx"]    = "&nbsp;×&nbsp;",
["xx"]    = "&nbsp;×&nbsp;",
["*"]      = "×", -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}}
["*"]      = "×",
["/"]      = "&thinsp;/&thinsp;",  -- for a table of high/low temperatures with {{convert|83|/|63|F|disp=br()|abbr=values}}
}
}


local range_aliases = {
local range_aliases = {
-- ["alternative name for a range"] = "standard range name"
-- ["alternative name for a range"] = "standard range name"
["&"]        = "and",
["–"]        = "-",
["–"]        = "-",
["&ndash;"]  = "-",
["&ndash;"]  = "-",
["to-"]      = "to(-)",
["×"]        = "x",
["×"]        = "x",
["&times;"]  = "x",
["&times;"]  = "x",
Line 183: Line 181:
["lang"] = "lang",
["lang"] = "lang",
["lk"] = "lk",
["lk"] = "lk",
["near"] = "near",
["order"] = "order",
["order"] = "order",
["qid"] = "qid",
["qid"] = "qid",
["qual"] = "qual",
["qualifier"] = "qual",
["round"] = "round",
["round"] = "round",
["sigfig"] = "sigfig",
["sigfig"] = "sigfig",
Line 194: Line 193:
["stylein"] = "stylein",
["stylein"] = "stylein",
["styleout"] = "styleout",
["styleout"] = "styleout",
["tracking"] = "tracking",
}
}


Line 211: Line 211:
["abbr"] = {
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
-- ["local text for option value"] = "en value used in this module"
["comma"] = "opt_nocomma?",    -- no numsep in input or output numbers
["def"] = "",                  -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
["def"] = "",                  -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
["h"] = "on",                  -- abbr=on + use "h" for hand unit (default)
["h"] = "on",                  -- abbr=on + use "h" for hand unit (default)
["hh"] = "opt_hand_hh",        -- abbr=on + use "hh" for hand unit
["hh"] = "opt_hand_hh",        -- abbr=on + use "hh" for hand unit
["in"] = "in",                  -- use symbol for LHS unit
["in"] = "in",                  -- use symbol for LHS unit
["mos"] = "mos",                -- in a range, repeat the input unit (no longer used)
["none"] = "off",              -- old name for "off"
["none"] = "off",              -- old name for "off"
["off"] = "off",                -- use name for all units
["off"] = "off",                -- use name for all units
["on"] = "on",                  -- use symbol for all units
["on"] = "on",                  -- use symbol for all units
["out"] = "out",                -- use symbol for RHS unit (default)
["out"] = "out",                -- use symbol for RHS unit (default)
["unit"] = "unit",              -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km)
["values"] = "opt_values",      -- show only input and output numbers, not units
["values"] = "opt_values",      -- show only input and output numbers, not units
["~"] = "opt_also_symbol",      -- show input unit symbol as well as name
["~"] = "opt_also_symbol",      -- show input unit symbol as well as name
},
},
["adj"] = {
["adj"] = {
["1"] = "opt_singular",        -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)
["flip"] = "opt_flip?",        -- reverse order of input/output
["j"] = "opt_use_nbsp",        -- "join": use "&nbsp;" instead of " " between value and unit name
["mid"] = "opt_adjectival, opt_adj_mid",  -- adj=on with user-specified text after input unit (between input and output)
["mid"] = "opt_adjectival, opt_adj_mid",  -- adj=on with user-specified text after input unit (between input and output)
["nocomma"] = "opt_nocomma?",  -- no numsep in input or output numbers
["off"] = "",                  -- ignored (off is the default)
["off"] = "",                  -- ignored (off is the default)
["on"] = "opt_adjectival",      -- unit name is singular and hyphenated
["on"] = "opt_adjectival",      -- unit name is singular and hyphenated
Line 242: Line 237:
["gaps"] = "opt_gaps",          -- use gaps, not numsep, to separate groups of digits
["gaps"] = "opt_gaps",          -- use gaps, not numsep, to separate groups of digits
["gaps3"] = "opt_gaps, opt_gaps3",  -- group only in threes rather than default of no gap before a single digit after decimal mark
["gaps3"] = "opt_gaps, opt_gaps3",  -- group only in threes rather than default of no gap before a single digit after decimal mark
["gaps5"] = "opt_gaps?",        -- deprecated 2015-05-29, was: opt_gaps + opt_comma5
["off"] = "opt_nocomma",        -- no numsep in input or output numbers
["off"] = "opt_nocomma",        -- no numsep in input or output numbers
},
},
Line 249: Line 243:
},
},
["disp"] = {
["disp"] = {
["/"] = "or?",                  -- see "slash"
["5"] = "opt_round=5?",         -- round output value to nearest 5
["2"] = "opt_output_only?",    -- display only output value and symbol/name (not input)
["5"] = "opt_round=5",         -- round output value to nearest 5
["b"] = "b",                    -- join: '(...)'
["b"] = "b",                    -- join: '(...)'
["(or)"] = "(or)",              -- join: '(...)' with 'or' between outputs in a combination
["(or)"] = "(or)",              -- join: '(...)' with 'or' between outputs in a combination
Line 258: Line 250:
["comma"] = "comma",            -- join: ','
["comma"] = "comma",            -- join: ','
["flip"] = "opt_flip",          -- reverse order of input/output
["flip"] = "opt_flip",          -- reverse order of input/output
["flip5"] = "opt_flip, opt_round=5?",  -- disp=flip + disp=5
["nocomma"] = "opt_nocomma?",  -- no numsep in input or output numbers
["number"] = "opt_output_number_only",  -- display output value (not input, and not output symbol/name)
["number"] = "opt_output_number_only",  -- display output value (not input, and not output symbol/name)
["or"] = "or",                  -- join: 'or'
["or"] = "or",                  -- join: 'or'
Line 266: Line 256:
["output only"] = "opt_output_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits",    -- user-specified text before input and output units
["preunit"] = "opt_two_preunits",    -- user-specified text before input and output units
["s"] = "or?",                  -- see "slash"
["slash"] = "or?",              -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful
["sqbr"] = "sqbr",              -- join: '[...]'
["sqbr"] = "sqbr",              -- join: '[...]'
["table"] = "opt_table",        -- output is suitable for a table cell with align="right"
["table"] = "opt_table",        -- output is suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen",  -- output is suitable for a table cell with align="center"
["tablecen"] = "opt_tablecen",  -- output is suitable for a table cell with align="center"
["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value)
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
Line 288: Line 275:
["on"] = "on",                  -- link all unit names or symbols (but not twice for the same unit)
["on"] = "on",                  -- link all unit names or symbols (but not twice for the same unit)
["out"] = "out",                -- link RHS unit name or symbol
["out"] = "out",                -- link RHS unit name or symbol
},
["near"] = {
["5"] = "opt_round=5?",        -- round output value to nearest 5
},
},
["order"] = {
["order"] = {
["flip"] = "opt_flip",          -- reverse order of input/output
["flip"] = "opt_flip",          -- reverse order of input/output
["out"] = "opt_order_out",      -- do not show input; instead, use order in output combination, with the first output shown as the input
},
},
-- qid=x is handled as a special case: x should be a Wikidata Q item identifier.
-- qid=x is handled as a special case: x should be a Wikidata Q item identifier.
-- qual=x is handled as a special case: x should be a Wikidata Q item identifier.
["round"] = {
["round"] = {
["0.5"] = "opt_round=0.5",      -- round output value to nearest 0.5
["0.5"] = "opt_round=0.5",      -- round output value to nearest 0.5
Line 307: Line 293:
["sortable"] = {
["sortable"] = {
["off"] = "",                  -- ignored (off is the default)
["off"] = "",                  -- ignored (off is the default)
["in"] = "opt_sortable_on?",    -- same as "on"
["on"] = "opt_sortable_on",    -- output sort key for use in a sortable table, based on value from converting to a standard base unit
["on"] = "opt_sortable_on",    -- output sort key for use in a sortable table, based on value from converting to a standard base unit
["out"] = "opt_sortable_on?",   -- same as "on"
["debug"] = "opt_sortable_on, opt_sortable_debug", -- |sortable=debug is the same as |sortable=on|debug=yes
},
},
["sp"] = {
["sp"] = {
Line 322: Line 307:
-- stylein=x is handled as a special case: x can be any text
-- stylein=x is handled as a special case: x can be any text
-- styleout=x is handled as a special case: x can be any text
-- styleout=x is handled as a special case: x can be any text
-- tracking=x is handled as a special case: x can be any text
}
}


Line 328: Line 314:
all_categories = all_categories,
all_categories = all_categories,
all_messages = all_messages,
all_messages = all_messages,
currency = { ['$'] = true, ['£'] = true },
currency = { ['$'] = true, ['£'] = true, ['€'] = true, ['₱'] = true, ['₽'] = true, ['¥'] = true },
customary_units = customary_units,
customary_units = customary_units,
disp_joins = disp_joins,
disp_joins = disp_joins,
Icem4k
Administrators, upwizcampeditors
0

edits

Retrieved from "http://www.chalochatu.org/Special:MobileDiff/2495...20663"